Crown Moulding Inside Corner
The Ecomony Crown Moulding Inside Corner is designed to work with a wide range of crown mouldings from most manufacturers and materials. These precut corner pieces are designed to eliminate negotiating tough angle cuts resulting in a clean inside corner when installing crown moulding and may be used with a variety of manufacturers and materials.
These decorative moulding blocks are a durable plastic and come primed and ready to paint to your specifications. They are available in either 4 1/8" , and 5 7/8" and are designed to work with almost any crown moulding that has a 4 to 6 inch face. These miter-free corners easily install with 2" screws and/or adhesive. The mounting "tabs" may be removed for finishing an open sided 90 degree corner.
Product Specs for our miter-free inside Corner Blocks:
Material: Molded Plastic
4 1/8" Specs:
- Depth: 3 1/4 inch
- Length: 4 1/8 inch
- Width: 4 1/8 inch
- Weight: 3.2 ounces
5 7/8" Specs:
- Depth: 4 9/16 inch
- Length: 5 7/8 inch
- Width: 5 7/8 inch
- Weight: 5.6 ounces
Do these pieces clip on?
Do I still need to cope the inside corners?
No. When using these blocks, cuts at your inside corners will be 90 degree cuts. These pieces are designed to eliminate the need of coping inside corners.
Do You sell Outside corners?
What are the tabs for?
The tabs are used to secure the corner pieces to the wall. The moulding installs over he tabs and sits flush with the wall.
Do these work with only Focal Point mouldings?
These pieces are designed to work with a wide variety of crown moulding brands and materials, and are not specific to those manufactured by Focal Point.
Do these work with wood mouldings?
Yes. These inside corners work with wood mouldings and can be painted to whatever color is needed.
Can You Use These if The room has a bullnose corner?
No. If the room has a bullnose corner you will not be able to use these.